Phones answered 24/7Manchester, NH
Call (833) 490-5225
(833) 490-5225
Urgent? Phones answered 24/7

Sump pump failure water damage in Manchester

When the pit overflows because a pump stalls, loses power or cannot keep up, the cellar fills. Water out first, then drying and a cause check.

  • Answered 24/7
  • Frozen pipes and ice dams
  • Merrimack flood cleanup

Get a fast quote

Fastest: call (833) 490-5225. Or send this and we call you back.

Sump Pump Failure

Sump Pump Failure Water Damage: what it covers

Quick answer

A sump pump fails when it loses power, jams, wears out or is simply outpaced by the inflow, and the pit then overflows into the cellar. Manchester Water Damage Restoration answers these calls for Manchester and Hillsborough County at any hour, and a crew is dispatched as fast as one is available. Keep out of the water until the power is safe.

Sump Pump Failure Water Damage illustration for Manchester, NH

A sump pump is a small machine given a large job. It sits in a pit cut into the cellar floor, collects the water that a perimeter drain or the soil sends there, and lifts it out through a discharge pipe. As long as it runs, nobody thinks about it. When it stops, the pit fills in minutes or hours depending on the weather, and then the cellar does. Most failures happen exactly when the pump is most needed, in the middle of a storm or a spring thaw.

The causes are few and recognizable. A power cut takes out a pump that has no battery backup. A float switch gets stuck against the pit wall. A check valve sticks or fails and lets the discharge water drain back into the pit. A motor wears out after years of cycling. A discharge line freezes or clogs with silt. And sometimes the pump is in perfect order but too small for the volume of water arriving, so it runs flat out and still loses.

Water from a failed pump is usually groundwater, which starts out cleaner than sewage but picks up soil, silt and whatever is stored on the floor. The cleanup is a standard extraction and drying job, with the added step of finding out why the pump failed so that it is fixed before the next rain. That repair belongs to a plumber or pump installer, and the crew will tell you when to call one.

Service area
Manchester & Hillsborough County
Availability
Phones answered 24/7, emergencies first
Warning signs

Signs you need sump pump failure water damage

Never touch the pump, its cord or the outlet while standing in water, and do not reach into a pit to free a float. Cut the power from a dry location, or call for help.

  • A pit that is brimming and the pump is silent, even though the cellar floor is still damp
  • A pump that hums but does not move water, which points to a jammed impeller or a stuck check valve
  • A pump that cycles constantly and never catches up with the inflow
  • A pump that has been running since the storm began and is hot to the touch
  • Water on the cellar floor in a line leading away from the pit
  • A discharge pipe outside the house that is frozen, kinked or blocked, so no water leaves
  • A pit alarm sounding, or a power outage during rain or a thaw
  • A rattling or grinding noise, or a pump that is many years old and has never been serviced
Options

Types and options for sump pump failure water damage

Power loss during a storm

The pump is sound, but the electricity went out when the rain arrived. This is the commonest story in any region with overhead lines and winter storms. A battery or water-powered backup solves it, and the cleanup is a plain extraction and dry-out.

Mechanical failure

The float is stuck, the impeller is jammed with grit, the motor has burned out or the check valve has failed. These tend to appear after a long dry spell when the pump has sat unused, or after years of working through silt. The pit may have been quietly full for hours before anyone saw it.

Overwhelmed or frozen discharge

In a thaw or a cold snap the discharge pipe can freeze at the outlet, and a pump that is pushing against ice only recirculates its own water. In a very heavy rain, even a healthy pump can be outpaced. The remedy is a larger system or a second pump, not a faster cleanup.

Still stuck? We pick up 24/7.

If it's an emergency, call now. For non-urgent sump pump failure water damage, send the form and we'll call you back.

Why do sump pumps fail during the storms they are meant for?

A pump runs hardest during storms, which is when the grid is most likely to fail and when a worn part is most likely to give out. Rain, thaw and high groundwater all arrive together, so the pump faces its heaviest load and its worst conditions at the same moment.

There is a statistical cruelty to sump pumps: they sit idle for weeks in dry conditions, then are asked for maximum output in a downpour. A float that has sat in the same position for months can stick. A motor that has not run since the previous spring might not start. And during a regional storm the electric supply is stressed too, so the pump that works perfectly on a bench can be dead on a night with a power cut.

New Hampshire adds its own wrinkle. Spring runoff and heavy rain after a thaw load the soil with water, and a discharge line left on the ground can be frozen solid at its outlet. The pump is then working, the pit is draining, and the water is going nowhere. Checking the outlet in cold weather is as important as checking the pump.

Does Manchester's flood history make a backup pump worth thinking about?

Manchester has seen major river flooding in March 1936 and May 2006, and its cellars sit between three watercourses. Whether a backup suits a given house is a plumber's judgment, but the history shows that water tables here do rise to the point where a single pump is tested.

In the March 1936 flood the Amoskeag dam held after more than 500,000 sandbags were placed, and the river reached about 20 feet at Hooksett. In May 2006 the Merrimack ran roughly 10 feet over flood stage in Manchester and dozens of homes flooded. Neither event tells you whether a particular cellar will take water, but both show that the whole valley can be saturated for days, which is exactly the condition in which a pump runs without pause.

On the west side the Piscataquog River was the subject of the Hopkinton-Everett flood-control project after severe floods in 1927 and 1936, and neighboring Goffstown still reports that low-lying neighborhoods flood to some degree almost every year. In the east and south, Cohas Brook runs about 16.5 miles from Auburn to the Merrimack by way of the airport corridor. For a homeowner the practical reading is simple: in this city, a sump pump is a piece of equipment with real consequences if it stops, and a plan for its failure is part of owning an older cellar.

What should you check on a pump after a flood?

Check that the pit is clear of silt, that the float moves freely, that the check valve holds and that the discharge runs clear of the foundation. A pump that ran through a flood is worth testing and, if it is old, replacing. A plumber can do this properly.

After a loss, a pump is often tested by pouring a bucket of water into the pit and watching it cycle. That is a fair first step, but it does not prove the check valve works or that the discharge is draining away from the house. The crew notes what it sees while working in the cellar, and a plumber does the real servicing.

Plumbers in New Hampshire are licensed through the Office of Professional Licensure and Certification, and electrical work such as wiring a pump or its alarm falls to licensed electricians. Ask whoever you hire to say what license they hold and verify it with the agency. Manchester Water Damage Restoration does not assert a state restoration license because New Hampshire does not issue one for this trade.

  • Lift the float by hand and confirm the pump starts
  • Pour in water and watch for the pump to shut off cleanly
  • Look at the check valve for a back-flush of water into the pit
  • Follow the discharge pipe outdoors and confirm the end is clear and pointed away from the house

Will insurance pay for a failed sump pump?

It depends on the policy and the wording. Coverage for water that backs up through a sump or drain is often an optional endorsement rather than part of a standard homeowners policy. Read the policy, keep records and ask your agent. The New Hampshire Insurance Department takes complaints.

Claims for sump failure turn on the policy language, and policies differ. Some treat a pump failure as a covered sudden event, others exclude water that comes from the ground, and some provide limited backup coverage that must have been added in advance. We cannot tell you which applies to you, and we do not promise outcomes.

What helps in any case is documentation: photographs of the pit and the water line, a note of when the power went out and the pump's age and make if you know them. If you believe a claim has been handled unfairly, the New Hampshire Insurance Department's Consumer Services Unit takes complaints. It mediates, and it cannot force a payment.

Our process

How our sump pump failure water damage visit works

  1. Check the power before the water

    A sump pit sits next to outlets, and the pump itself is on a live circuit. The crew confirms the circuit is safe, and where the water has reached a panel or a furnace that area is isolated first. Nobody wades toward the pit until this is settled.

  2. Get the pit working or bypass it

    If the pump has simply lost power, a temporary submersible pump can lower the water while the cellar is worked on. If the pump is dead, the crew runs a temporary line out of the building so that extraction can start. A permanent repair is for a plumber to make.

  3. Extract the standing water

    Water is pumped out and the film left on the slab is lifted with an extractor. A cellar with a high water table can refill while this is going on, so the crew watches the pit level and the floor together rather than assuming the first pass is final.

  4. Remove what cannot be dried

    Carpet, pad, damp insulation, stored cardboard and any particleboard that has swollen are taken out. Studs, framing and masonry stay and are dried. If a floor drain also backed up, the water is treated as contaminated and the removal goes further.

  5. Dry, record and report the cause

    Dehumidifiers and air movers run until moisture readings are acceptable for each material. The crew records what the pump, check valve and discharge line looked like at the time, which is useful both for the plumber and for an insurance file.

Hillsborough County

Why sump pump failure water damage is different in Merrimack Valley

Manchester houses with a sump pit are mostly older ones with a pit added after the cellar was built. A pit cut into a century-old slab, or into a dirt floor that was later paved, may drain into a perimeter system of unknown age. If a house has changed hands several times, nobody may know where the discharge actually goes, and a discharge that runs into a floor drain is worth tracing, because that drain may be connected to the combined sewer. That matters, because in a heavy storm the combined system can be full.

About 70 percent of the city's collection system is combined sewer, and EPA lists overflows to the Merrimack and Piscataquog Rivers, Ray Brook and Tannery Brook. This is a fact about water quality and the sewer, not a claim that any particular cellar floods from it. It does mean a pump that discharges to a drain, rather than outside, may be doing the wrong thing in the very conditions when it matters most.

The suburbs around the city, such as Goffstown on the Piscataquog and Hooksett on the Merrimack, have their own water tables and their own river histories. If you are in one of them, the same advice holds, and the crew serves the whole area from Manchester out to the towns listed on our areas pages.

Related

Basement Flooding After Heavy Rain

Rain, thaw and a high water table push groundwater into Manchester cellars. Standing water comes out first, then the structure is dried.

Sewer Backup Cleanup

Sewage in a cellar is contaminated water. Keep out, let a crew extract it, remove porous materials and sanitize before drying.

Crawl Space and Basement Moisture

Dampness in a cellar or crawl space is measured, dried and traced to where it comes from, so it stops feeding mold and rot.

Guides

Read before you book

FAQ

Sump Pump Failure Water Damage FAQs

My pump is running but the pit is still filling. What does that mean?

Either the pump is undersized for the inflow, the check valve is letting water run back, or the discharge is blocked or frozen. Any of the three can be diagnosed by watching a cycle, and a plumber can correct it.

Is the water from a sump failure dangerous?

It is groundwater, which is cleaner than sewage but not clean. It carries soil, bacteria and chemicals from the floor. Wear boots and gloves, and keep children and pets out until the cellar is cleared.

How soon should wet materials come out?

As soon as a crew can reach you. Porous materials that stay wet for more than a day or two begin to grow mold and lose their value. Extraction and drying within that window is what saves flooring and framing.

Do I need a battery backup?

It is worth asking a plumber. A backup keeps the pit emptying during a power cut, which is the leading reason pumps fail in storms. Whether it is right for a particular cellar depends on the pit, the circuit and the water table.

Can you replace my sump pump?

The crew's work is extraction, removal and drying. Replacing or installing a pump is plumbing work for a licensed plumber, and the crew can tell you what they saw at the pit.

Is the cellar floor going to be damaged?

Concrete and stone are usually fine. The materials on top of them, such as carpet, pad, paneling and wallboard, are the usual losses. See basement flooding after heavy rain for how the dry-out of a masonry cellar goes.

WhatsApp