Phones answered 24/7Manchester, NH
Call (833) 490-5225
(833) 490-5225
Guide

After the Merrimack comes into the house: the first steps

First steps after Merrimack or Piscataquog water enters a Manchester home: safety, power, photos, what to leave alone and what flood water changes about the cleanup.

Illustration for the guide "After the Merrimack comes into the house: the first steps" (Manchester, NH)
Short answer

Get everyone out of the water, keep away from anything electrical that is wet, and treat all river water as contaminated. Photograph the waterline before moving anything, call your insurer, and do not start pumping a flooded basement quickly. Then bring in a crew to extract, sample the damage and dry.

Key takeaways

  • Electricity is the first hazard in a flooded house, and the main service should be switched off only if the panel can be reached dry.
  • River water carries sediment and sewage, so porous materials it touched are normally removed rather than dried.
  • Photographs of the waterline and the damage, taken before cleanup, are the record that an insurance claim leans on.
  • A flooded basement should not be emptied fast, because saturated soil outside can press a weakened wall inward.
  • Manchester's flood history includes March 1936 and May 2006, so an event on the Merrimack is a known pattern, not a freak.
  • Mold needs time and moisture, so removal and drying matter more than any single product.

What is the first thing to do when river water is in the house?

Leave the water, keep everyone out of it, and stay away from anything electrical that is wet or submerged. If the main panel is in a dry spot and reachable without standing in water, shut off power. If not, leave it and call for help.

Floodwater is a hazard before it is a mess. It can carry current from submerged outlets, appliances and wiring, and it hides steps, debris and slippery sediment. Do not wade through a flooded basement to reach a breaker panel or a furnace. If the panel is in the flooded space, the utility or an electrician has to deal with it, and that is a call to make from outside the house.

Move people and pets to the upper floors or out of the building. Children and anyone with cuts should stay out of the water altogether. River water in an urban stretch such as the Merrimack through Manchester should be presumed contaminated, so avoid touching it, and wash hands thoroughly after any contact. Everything about the next few hours is easier if the first decision is simply to get dry and stay safe.

Is Merrimack flood water considered contaminated?

Yes. Floodwater from a river picks up sediment, runoff and, in a city with combined sewers, can mix with sewage. Treat all of it as contaminated, regardless of how clear it looks.

Manchester's sewer collection system is about 70 percent combined, meaning sanitary flows and stormwater travel in shared pipes. When heavy rain overwhelms the system, overflows discharge to the Merrimack and Piscataquog Rivers and to Ray Brook and Tannery Brook, under an EPA settlement plan that runs about 20.5 years. That is a water-quality fact about the system and says nothing about whether any given home will take water. What it does mean is that river water in an urban reach should never be assumed clean.

In practical terms, contaminated water changes the work. Carpet, pad, insulation, particleboard, unsealed wood and drywall that sat in it are normally removed and discarded, not dried. Hard surfaces get cleaned and disinfected. Skipping that step to save a little effort is how smells and illness follow a flood. Gloves, boots and a mask are reasonable for anyone handling wet material.

Should I pump the water out right away?

Not all at once. In a flooded basement, the soil outside is also saturated, and removing the water too quickly can let that pressure push a foundation wall inward. Lower the level in stages and keep watching the walls.

The general practice is to let the water recede outside first, then pump the basement down gradually, a portion at a time, so that the pressure inside and outside stays roughly balanced. A crew with extraction and pumping equipment handles this routinely and watches for cracking, bowing or shifting as the level drops. Many Manchester foundations are old, with stone or early concrete walls, and they deserve that patience.

A basement that fills again as soon as it is pumped is telling you the groundwater or river is still high. In that case, extra pumping only wastes effort. Wait for the river to fall, and meanwhile keep out of the space, keep fuel-fired appliances off and let the crew set the schedule. Do not use a wet-dry vacuum on standing floodwater and do not plug anything electrical into a wet area.

What should I photograph and write down before cleanup?

Photograph the waterline on walls, the standing water, damaged belongings and the building from the outside, with timestamps if possible. Write a list of what was affected. Do this before moving or discarding anything.

An insurance conversation after a flood depends on records. Take wide photographs of each room, then close-ups of the waterline, the base of walls, appliances and the contents. A video walk-through, narrated, is quick and useful. Note the date and the approximate time the water arrived and peaked. If the water crossed from a neighbor's property or came up through a floor drain, write that down too, since it helps establish the source.

Keep damaged items until the adjuster has seen them or approved their disposal, unless they are a health hazard. Keep receipts for everything you spend on emergency steps such as hotel stays, equipment hire and cleanup supplies. These records belong in a folder you can find later, since the claim may take weeks. Policies treat river flooding differently from a burst pipe, so ask your insurer what yours covers.

What has the Merrimack done to Manchester before?

In March 1936 the river rose to about 20 feet at Hooksett, and the dam at Amoskeag in Manchester held after more than 500,000 sandbags were placed. In May 2006, heavy rain put dozens of Manchester homes under water.

The 1936 flood is the one old residents in the mill district still talk about. Water reached roughly 20 feet at Hooksett upstream, and the Amoskeag dam in Manchester held against it only after sandbagging on a very large scale. The Piscataquog on the west side had severe floods in 1927 and 1936, which led to the Hopkinton-Everett flood-control project. Goffstown reports that its low-lying neighborhoods flood almost every year.

Heavy rain starting on May 11, 2006 sent the Merrimack about 10 feet over flood stage in Manchester, and dozens of homes were flooded. Upstream the Suncook River reached flood level on May 16 and cut a brand-new channel in Epsom. Goffstown reported 82 damaged structures, and a disaster declaration followed on May 25. Allenstown later bought out 14 flood-prone homes. The point is not alarm. It is that river flooding here is a documented pattern, and the planning is better done before the water arrives.

What should I leave alone until a crew arrives?

Leave electrical equipment, gas appliances, the furnace and anything structural that looks damaged. Do not run central heating or air systems that may have taken in water, and do not mix cleaning chemicals.

A furnace, water heater, electrical panel or boiler that has been submerged should be inspected by a qualified tradesperson before it is used again. In New Hampshire, plumbers and electricians are licensed through the Office of Professional Licensure and Certification, so that is the agency to check if you want to confirm a tradesperson's credentials. Gas appliances that were under water need professional attention as well, and a gas smell means leaving the building and calling the utility from outside.

Do not run a household fan across contaminated surfaces in the hope of drying them, because it spreads particles through the air. Do not pour bleach into standing water or mix it with other cleaners. A restoration crew has extraction equipment, air movers, dehumidifiers and protective gear, and the sequence matters: water out, contaminated material out, then drying and cleaning.

How do old and mill-era buildings handle river water?

Brick, stone and plaster hold water and dry slowly, and old basements often have dirt floors, rubble walls or finishes that were never meant to get wet. Expect longer drying and more careful opening of walls.

Much of the older housing near the Merrimack is brick or heavy-framed. The worker districts around the Amoskeag Millyard date mostly from 1838 to 1882, and a long run of homes in Manchester predates 1940. Those buildings carry plaster over lath, masonry foundations and tight spaces between floors where water can sit unseen. Water reaching only the basement can still climb into walls by wicking.

In a multi-unit building, a flood in one apartment's lower level can move into shared walls and affect neighbors. Coordination among owners and tenants becomes part of the job. If a building has paint from an earlier century, ask before sanding or scraping, because lead is regulated through the state Department of Health and Human Services, and asbestos abatement through the Department of Environmental Services. Disturbing old materials without checking is how a flood turns into a second problem.

When does mold become a risk after river water?

Mold can begin growing on damp organic materials within a few days if they stay wet and warm. Fast removal of wet material and prompt drying are the best prevention, and growth found later calls for its own cleanup.

After a flood, the goal is to get moisture out of the structure before growth gets established. That means taking out carpet, pad and soaked drywall, opening wall cavities that are wet, and running dehumidifiers and air movers until readings show the framing is dry. A musty smell, a stain spreading on a ceiling or wall, or visible spots are signs that moisture was left behind.

Do not paint over stained areas or cover them with new flooring to make a house look finished. That traps moisture. If growth is found, it needs containment and removal, and a crew should say how it is going to manage that. There is no state license for this trade sourced here, so ask a firm about its training and methods. Keep an eye on a flooded basement for weeks after, especially in spring when the ground stays wet.

Frequently asked questions

Is it safe to stay in a house after the Merrimack floods the basement?

It depends on what is flooded. If the electrical panel, furnace or gas appliances are under water, the house may not be safe to occupy until they are inspected. Even with a dry upstairs, the basement air can be affected. If you are unsure, stay elsewhere until a qualified person has looked at the power and heating.

Will my homeowner insurance cover Merrimack flood damage?

Many standard homeowner policies exclude rising river water unless a separate flood policy or endorsement was bought, while treating a burst pipe differently. Read your policy and ask your insurer directly. If a dispute arises, the New Hampshire Insurance Department's Consumer Services Unit takes complaints and mediates, though it cannot force a payout.

How soon should drying start?

As soon as water is out and contaminated material is removed. The sooner moisture is taken out of framing and masonry, the less chance mold has to take hold. A crew will extract, remove what cannot be saved and set drying equipment, then return to take readings until the structure measures dry.

Can I keep carpet that got wet from river water?

Usually not. Carpet and pad that sat in contaminated floodwater are normally removed and discarded because they cannot be reliably cleaned. Some hard surfaces and solid wood can be cleaned and dried. A crew should explain what is salvageable and why, and photograph the items before they leave the house.

What is different about a Piscataquog flood on the west side?

The Piscataquog runs along Manchester's west side, and it has a record of severe floods in 1927 and 1936, which led to the Hopkinton-Everett flood-control project. Goffstown upstream says its low-lying neighborhoods flood almost every year. The cleanup steps are the same as for the Merrimack: stay out of the water, document the damage, remove contaminated material and dry the structure. What differs is where the water came from, which is worth telling your insurer and your crew.

Sources

  1. Wikipedia
  2. New Hampshire Insurance Department
  3. NH Office of Professional Licensure and Certification

This guide is general information for Hillsborough County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.

Still stuck? We pick up 24/7.

If it's an emergency, call now. For non-urgent help, send the form and we'll call you back.

Keep reading

More guides

WhatsApp